Product Details

Use our water-based finishes to restore and condition:

absorbent aniline and semi-aniline leather,
non-absorbent full-grain or top-grain leather,
and vinyl upholstery.

Our finishes won’t sunfade or backstain like leather dyes. They don't feel plasticky, flake or peel like spray paints.

Do not use on fabric, suede, nubuck, bonded or faux leather.

Store in a temperate, dark place away from children.

Click here for SDS (Safety Data Sheets) and ingredient information.

See here before changing color!

Changing color is best suited to absorbent leather.

If the material repels water and will be heavily used, consider adding 1 part special order Satin Sealer to 4 parts color to improve durability. Thorough cleaning and stress testing the color are critical!

The following are not good candidates and will require touch-up:

changing from red / dark to white / pale;
worn, cracking, scaly or thinning leather;
furniture with lots of wrinkles, folds, deep creases (and therefore stress);
pieces that are heavily used or harshly cleaned (kids, dogs, chemicals);
car or boat upholstery (for these we suggest a heavier urethane coating);
bonded, faux or polyurethane (PU) ‘leather’ which repel all finishes (including their own).

Here's what wear looks like on non-absorbent leather or vinyl:

Our finishes wear naturally, resulting in a distressed look.

Deeper lines or creases receive more stress.

Picture of beige leather changed to Cognac and then scratched by dog claws — Dog claws can quickly scuff the color.

Easy rub-off indicates inadequate cleaning.

The color may flake if applied too thickly and allowed to pool in the grain.

This is easily corrected by thinning the color with alcohol and reapplying.

Learn more about changing color here.

How do I match a color?

How do I clean?

Do I need a sealer?

Answer these three questions to determine what clear finish, if any, is needed for leather:

Do unworn areas absorb water?

Yes

Are you applying a primary or secondary color (red, orange, yellow, green, blue, purple)?

Yes

What kind of luster do you want?

Matte

Satin

Semi-Gloss

Shiny

Mix 1 to 2 parts Clear Prep+Finish™ + 1 part color for the first coat. Use one coat of Satin Sealer for a final topcoat.
Learn more about Satin Sealer here.

Use equal parts color and Clear Prep+Finish™ from start to finish. If it dries too shiny, reduce the amount of clear in the mix for your final coat. Conversely, if more shine is desired, add more clear to the mix or use alone as a topcoat.

Use equal parts color and Clear Prep+Finish™ from start to finish. If more shine is desired, add more clear to the mix or use alone as a topcoat.

Mix 1 to 2 parts Clear Prep+Finish™ + 1 part color for the first coat. Increase the ratio of color to clear for subsequent coats (approximately 4 to 1) for a satin finish.

Mix 1 to 2 parts Clear Prep+Finish™ + 1 part color for the first coat. Use color alone for subsequent coats. It will dry matte and does not need an additional sealer.

Mix 1 to 2 parts Clear Prep+Finish™ + 1 part color for the first coat. Reduce the ratio to equal parts for subsequent coats to get better coverage. If more shine is needed, use clear alone for a final topcoat.

Mix 1 to 2 parts Clear Prep+Finish™ + 1 part color for the first coat. Reduce the ratio to equal parts for subsequent coats for a semi-gloss finish.

Use Satin Sealer for a final topcoat.
Learn more about Satin Sealer here.

Apply a thin coat of Clear Prep+Finish™ and disperse quickly so it does not dry too shiny. You can also try equal parts color and clear.

Apply Clear Prep+Finish™ as a final topcoat.

The color will dry matte and does not need an additional sealer.

Mix 4 parts color with 1 part Clear Prep+Finish™ and use from start to finish (or alone as a final topcoat).

Mix equal parts color with 1 part Clear Prep+Finish™ and use as a final topcoat.

Use Clear Prep+Finish™ as a final topcoat.

Shipping Info

Orders received before 10 am MST on weekdays (excluding US holidays) are usually shipped same-day.

Most domestic orders are shipped via Priority Mail unless otherwise requested and typically arrive in 2-4 business days. Packages over 5 lbs. as well as all Canadian and international orders are shipped via UPS.

We are not responsible for delays and cannot refund shipping costs except for UPS Next Day Air.

You will receive an automated email with tracking number. Please secure your package in a timely fashion to avoid freezing during winter months.

Canadian and international Customers, use coupon code internationalCLUB (case and space sensitive) to discount the freight and duties on 8 or 16 oz. bottles of color. Rub 'n Restore, Inc. is not responsible for duties, tariffs or other expenses incurred.

Click here for more shipping information.

Returns & Exchanges

Return & Exchange Policy

We do not accept returns on opened items or Custom Colors. All other products, if unopened, may be returned within 60 days of purchase.

PLEASE NOTE, it may be cost prohibitive to return the following:

a 2 oz. color,
a 2 oz. or 4 oz. clear,
a 1 oz. filler,
or cleaner.

If you request a return label, the cost will be deducted from any return or exchange. Read our complete return policy here.

2 reviews for Pine Vinyl & Leather Finish

Donna Archambeau

5 out of 5

June 14, 2024

Boat seat

Per your assist on color, i mixed the Pine and Midnight Blue to end up with a hunter green. It took a bit to get the right combo of the two, but in the end it tured out perfect

Carly

5 out of 5

June 5, 2024

Wow, almost a perfect match to our pair of Ekornes chairs and foot stools. Very little was needed, and it rubbed on beautifully. We are delighted.

+1