Satin Sealer is a clear acrylic-urethane finish that serves several purposes:
- Use it to seal Butterscotch, Cherrywood, Wine, Red Chili, Plum, Midnight Blue, Storm Blue, and Lagoon (which can transfer color) when a matte finish is desired. Our Clear Prep+Finish™ can also be used but will impart more shine.
- If changing color of non-absorbent leather or vinyl, dilute 2 to 4 parts color with 1 part Satin Sealer to improve durability and minimize touch-up.
- Most our colors dry low luster. For an even duller finish, apply one thin coat of Satin Sealer.
Satin Sealer can be applied with a damp sponge or spray gun like all our other finishes. Please note:
- When used alone as a topcoat, the dulling agent may leave a whitish haze on dark and bright colors (see below). The solution is to add the tiniest bit of color to the sealer before applying.
- Satin Sealer imparts a thicker film. Thin coats are better than thick coats.
On most materials, our Clear Prep+Finish™ dries shiny when used alone as a topcoat. A less shiny result can be achieved by mixing color with clear to make a glaze.
Satin Sealer is not visible in our catalog, but here is a direct link to purchase it:
I’m using Satin Sealer as a sealer for my project. How long do I wait after my final application of color to apply sealer?
As soon as the color feels dry (even though it’s not yet cured), you can apply Satin or Dull Sealer.
Hi there! I’m curious if a satin sealer would end up looking even if applied over a sofa that is already satin but has some matte patches (I used rubbing alcohol to get off marker, leaving some matte areas). I’d like to coat it and get it all looking even again.
Thanks!
Question is, did the alcohol indeed strip some of the original clear finish or did it just remove years of body oil and residue from conditioners? To get the best result with our products, you’ll need to clean the surface with alcohol anyway. That said, the Satin Sealer should blend nicely with areas that don’t need cleaning or treatment.
Is the use of a sealer necessary after applying color?
A sealer, whether our Clear Prep+Finish™ or Dull / Satin Sealer, is recommended bright organic colors like blues, reds, Persimmon and Eggplant.
is it possible to change the color of leather with this product? I have white leather for upholstery and clothing and would like to color some of it.
Hi Moe, see here about changing color on upholstery and learn about working with garments. These articles about the types of leather and the difference between dyes and finishes will also be helpful.
I purchased my “Slate” color(16oz x2) & Sealer (8oz) I have a sofa, loveseat & chair to do. I put it on small area of back of sofa to “test” before diving in it looks too dull so tried light coat of the primer – sealer it’s way too shiny. Reading about your Satin Sealer has me a bit confused it says it’s a bit more finicky to use, recommend for brighter colors (which I don’t have) & then that it can dry dull or streaky. Please help with advice before I move forward Thanks
Try mixing the Slate color with the Clear Prep+Finish to make a glaze for a more subdued finish that’s not dull and not too shiny. See here.